Skip to content
CRACKWiki
Powered by Pagefind
CRACK Gameplay

CRACK Containment Plating: Dynamite Mk III and the inner sack

Breach CRACK's Containment Plating with Dynamite Mk III and a Blowtorch, survive the seven-second fuse, then open the inner sack and catch the specimen.

10/30/2026 1.1.8 Last updated: 11/4/2026 3 min read

FAQ

What breaks Containment Plating in CRACK?
Dynamite Mk III, sold in the Prograde Catalog, with a Blowtorch to ignite it. The Plating ignores pickaxes, shovels, and the Jackhammer.
How long is Dynamite Mk III's fuse?
Seven seconds. Clear a retreat route before lighting the charge and leave the passage immediately.

The barrier that ignores tools

The game announces Containment Plating Reached and warns that excavation equipment no longer works. Pickaxe, Shovel, Jackhammer, and every other cutting tool leave the black, obsidian-like layer intact, and swinging at it only burns durability while raising agitation.

What you need before the last tunnel

Requirement Detail
Prograde Catalog Unlocked by upgrading one Workbot a single level with Chalazite.
Dynamite Mk III Sold in the Prograde Catalog at $69.99, with a seven-second fuse.
Blowtorch Lights the charge. Without it, the Dynamite stays inert.
Cleared retreat Enough open floor to back out of the blast radius.

The tools and catalogs guide lists the Prograde stock. Buy the Dynamite and the Blowtorch before the final descent: a return trip from the centre of the egg costs more time than the purchase does.

The dynamite guide covers the charge itself: the Prograde Catalog price, the seven-second fuse, and the placement and retreat.

Set the charge and get out

  1. Open a path wide enough to walk the charge in and run out again.
  2. Place or throw the Dynamite against the Plating.
  3. Light it with the Blowtorch.
  4. Retreat immediately. Do not stop to pick up anything on the way out.
  5. Return after the blast and check whether the opening is complete.
  6. If the layer is still sealed, set a second charge instead of chipping at the edge.

Seven seconds does not cover a narrow tunnel. Clear the retreat before the charge goes down: the blast that opens the Plating also knocks you over, and a corridor built for one person at a time is where the wipe happens.

Break the inner sack and catch the specimen

Behind the Plating sits the inner sack holding the specimen. Clear the surrounding material until you can reach it, then keep damaging the sack until the release objective clears.

The sack sits in deep material with little standing room, so widen the approach before the final stretch rather than after.

When the objective changes to a retrieve prompt, stop mining. The specimen is a small living chicken, it moves among the broken material, and it is easy to lose in the rubble of the room you just opened. Follow it, corner it, and pick it up.

After the breach

The walkthrough maps the orders that lead here, from Bone and Hatchite deposits through the Workbot upgrade that opens Prograde. The achievement checklist lists EGG: Containment Breach plus both ending unlocks.

CRACK and its imagery belong to Rafoli.

Related Articles

Was this helpful?