CRACK mods: BepInEx setup and the five mods out now
Install BepInEx 5 next to CRACK.exe, drop plugins in BepInEx/plugins, and see what the current CRACK mods change, checked November 11, 2026.
FAQ
Does CRACK support mods officially?
Which BepInEx version does CRACK need?
Do CRACK mods break achievements or the leaderboard?
Do other players need the same mods in co-op?
Where is the CRACK install folder?
What happens to mods after a CRACK patch?
Is there official mod support in CRACK?
No. CRACK ships without a mod menu, a workshop page, or a loader, and no patch note through 1.1.29 adds one. What exists instead is the standard Unity route: BepInEx, a plugin framework that attaches to the game at launch and loads DLLs from a folder you control.
That has two consequences worth knowing before you start. Mods are version-sensitive, because they patch code compiled into a specific build. And they are all third-party, so the only trust signal is the author’s release page.
Which BepInEx build does CRACK need?
BepInEx 5, win_x64. The CardPullOut install notes are blunt about it: BepInEx 5 and the win_x64 package, not BepInEx 6 and not x86. The CameraComfort description names 5.4.23.6 as its tested framework version.
Two setup details that catch people out:
- Every mod here is a Windows DLL. None of the five publishes a Mac or Linux build, and the framework packages they depend on are win_x64. If you play on a Mac or a Linux desktop, skip this page.
- The DLL has to sit beside the executable, not in a subfolder.
winhttp.dllnext toCRACK.exeis the check that it landed correctly.
Where do the files go?
Extract the BepInEx archive straight into the game folder, then start CRACK once so the framework can build its own directories, then quit at the main menu. The layout afterwards:
CRACK\
├── CRACK.exe
├── winhttp.dll <- BepInEx loader
├── doorstop_config.ini <- BepInEx loader
└── BepInEx\
├── plugins\ <- plugin DLLs go here
└── config\ <- settings files appear here
Plugin folders vary slightly. CardPullOut wants BepInEx\plugins\CardPullOut.dll, while CRACKToolbelt wants its own subfolder, BepInEx\plugins\CRACKToolbelt\CRACKToolbelt.dll. Follow the description you downloaded from rather than guessing.
Which CRACK mods exist now?
Five community projects were public on November 11, 2026. Four are BepInEx plugins; the fifth is a standalone save editor.
| Mod | Author | What it changes | Where it installs |
|---|---|---|---|
| CRACKToolbelt 1.7 | Darkikos | Rebuilds the hotbar display: larger icons, numeric and seven-segment durability, MK badges, movable row, scroll-to-highlight | BepInEx\plugins\CRACKToolbelt\ |
| CRACKPistol 1.0 | Darkikos | Adds a $39.90 pistol to the equipment catalog with 15 uses, for players and for the beetles the egg spawns | BepInEx\plugins\ |
| CameraComfort 1.8.1 | Darkikos | First- and third-person toggle, wider FOV, camera distance, and removal of sway and rotation smoothing | BepInEx\plugins\ |
| CardPullOut 1.0.0 | Yukitus | Makes the badge cable pull your ID card out of a reader when you walk away, instead of holding you in place | BepInEx\plugins\ |
| CRACK Savegame Editor | Yukitus | Standalone Windows tool for money, upgrades, items, and Work Order state — not a BepInEx plugin | Anywhere; it edits the save folder |
CRACKToolbelt
The hotbar mod, and the one that changes play rather than presentation. It runs in two modes. On a normal host it is a display and input layer over the two-to-four native slots. If the host also runs it, the mod switches to an enhanced mode where the item in your hand is tracked separately from the storage slots, which is how it reaches five carried items.
Settings open with F7 or from an icon in the pause menu, and the panel follows the game’s interface language — 16 of them, per the description. Removing CRACKToolbelt.dll returns the game to native slot rules on the next load, so a save made under the mod is not stranded.
CRACKPistol
A weapon, not a cheat. The description prices it at $39.90 in the standard catalog, bought through the normal equipment terminal and delivered like any other item, with 15 shots before it breaks. It knocks players down for about five seconds by default, kills an egg beetle outright, and closes the eyes that appear on the egg’s surface.
Treat those numbers as the mod author’s, not the developer’s: no pistol appears in the official patch notes, and the weapon lives in your client’s catalog. Its settings file is BepInEx\config\com.codex.crack.pistol.cfg, and the published defaults are a 5-second knockout, 60 m range, and a 0.25 s interval between shots.
CameraComfort
The motion-sickness mod. It adds a first-person/third-person switch plus a settings panel on F6, with independent FOV, camera distance, pivot height, and shoulder offset, and it can strip camera sway and rotation smoothing entirely. Its published compatibility line names CRACK 1.0.36 and BepInEx 5.4.23.6 — the game build is several patches behind 1.1.29, so test it before you plan a session around it.
The in-game alternatives are on graphics and display settings and accessibility settings.
CardPullOut
Fixes a small, constant annoyance: in the base game the badge stays in a reader until you walk back and press E, with the coiled cable holding you in place. With the mod, the cable goes taut and the card pops into your pocket at about 5 m. Two settings control it — PullMargin at 0.2 m of stretch, and TautTime at 0.15 s of tension.
It calls the game’s own “take badge” action, so it works as host or client and other players do not need it. Config lives at BepInEx\config\yukitus.crack.cardpullout.cfg. The badge itself is covered on employee badge and terminals.
CRACK Savegame Editor
The only entry here that is not a plugin, and the only one with a permanent cost. The author states that opening a save in the editor makes that run unranked for the leaderboard, always, including when you only restore a backup or copy a slot, and that no setting turns it back on. The save still plays normally.
It backs up every write as a ZIP in a Backups folder beside the executable, and it reads slots from %USERPROFILE%\AppData\LocalLow\Rafoli\CRACK\. What a save contains in the first place is on saves and backups.
How do I know a plugin actually loaded?
Open CRACK\BepInEx\LogOutput.log after starting the game. A working CardPullOut install writes its own line:
[Info :CardPullOut] CardPullOut 1.0.0 loaded.
No line means the DLL is in the wrong place or the framework did not inject. The three usual causes, in order: winhttp.dll is not beside CRACK.exe, the x86 package was used instead of win_x64, or the DLL is not in the path the mod’s own description names — some want BepInEx\plugins\ directly, some want a subfolder under it.
Do mods break achievements?
BepInEx itself is not a Steam feature and none of the plugin descriptions say whether achievement tracking survives. The safe assumption is that presentation and camera mods leave your achievements alone, while anything that spawns items or rewrites slots is on shakier ground — CRACKPistol’s shop entry exists only on your client, for example.
The tool that definitely costs you something is the save editor, because unranking is deliberate and permanent. Cheats typed into the developer console are a different mechanism with a different rule; the console page covers what its unlock switches off.
Do other players need the mods in co-op?
Mostly no. CRACKToolbelt, CameraComfort, and CardPullOut all describe themselves as local: your camera, your HUD, your cable, and the other players never see them. CRACKToolbelt’s extra carry capacity is the exception, and it only turns on when the host is running the same mod.
That means a mixed lobby behaves unpredictably. If something desyncs, remove the plugin folder and repeat the session before blaming the game; the connection failures that are not mod-related are on multiplayer not working.
How do I uninstall cleanly?
- Close CRACK. It writes its save on exit, and a plugin file in use cannot be deleted.
- Delete the plugin DLL or its folder from
BepInEx\plugins\. - Leave
winhttp.dllanddoorstop_config.iniif you want to keep the framework for other mods. For a fully vanilla install, delete those two plus theBepInExfolder and the loader’s leftover.doorstop_versionandchangelog.txt, which the original guide lists as part of the same set. - Start the game and check
LogOutput.logno longer lists the plugin.
Anything a mod added to a save is the part to watch. Every mod here writes into fields the native game already uses — slot counts, item identity, the badge — and each description gives a delete-the-DLL uninstall, so the safe order is: remove the plugin first, then load the save and check it behaves.
CRACK and its imagery belong to Rafoli. The mods above are community work and are not affiliated with Rafoli; download them from their own release pages.
Related Articles
guides
CRACK lost or shredded tools: Scanner, UV Flashlight, and what returns
What happens when a one-off CRACK tool is shredded or lost: the Deposit Scanner never restocks, the UV Flashlight comes in one copy, and what a reload returns.
guides
CRACK achievements not unlocking: why tracking stops
Why a CRACK achievement never fired: the console flag that pauses tracking, unlocks that need a coworker, and the conditions recent patches changed.
guides
CRACK console commands: unlock the dev console and every cheat
Open CRACK's developer console with Ctrl + Shift + ~, unlock the cheat set with one command, and check what each command costs before you touch a save.
Was this helpful?
Thanks for the feedback!